Cylinder Block, Valves and Internal Components/Recondition Valve Seats RECONDITION VALVE SEATS 1. Inspect valve seats for damage. If seats are loose, warped or distorted beyond reconditioning, replace cylinder head. Pitted or worn seats can be refaced using a seat cutter. M51558 -UN-31AUG88 M9552 -UN-01SEP88 2. To recondition valve seat, cut at 45˚ angle (B) to clean up seat. Cut narrowing angle (E) at 30˚. Finish cut at 45˚ (B) to establish seating surface width (A). 3. Cut valve seating surface (A) as close as possible to specifications. 4. Lap valves to seats after refacing. (See Section 100, Group 05.) SPECIFICATIONS A—Valve Seating Surface . . . . . . . . . . . . . . . .
1.30 mm (0.050 in.) B—Valve Seat Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45˚ C—Valve Face Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45˚ D—Valve Margin . . . . . . . . . . . . . . . . . . . . . . . 0.60 mm (0.020 in.) E—Valve Narrowing Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 30˚ CTM5 (20OCT92) 21-20-3 K Series Air Cooled Engine MX,2120A1,A4 -19-21OCT92 AllTractorManuals.com 220596 PN=118 INSPECT VALVE SPRINGS Inspect valve springs. Replace springs if damaged or if free length is less than specification. SPECIFICATION (MIN) -UN-31AUG88 Valve Spring Free Length . . . . . . . . . . . . . . . .
23.50 mm (0.930 in.) M50036 MX,2120A1,A2 -19-21OCT92 INSPECT VALVE GUIDES Clean inside of valve guides with valve guide cleaner. Measure inside diameter of valve guides. Replace cylinder block if inside diameter is greater than -UN-11MAR91 specifications. SPECIFICATIONS (MAX) I.D. Intake Valve . . . . . . . . . . . . . . . . . . . . . . . . . . 6.10 mm (0.240 in.) M80247 Exhaust Valve . . . . . . . . . . . . . . . . . . . . . . . . 6.13 mm (0.242 in.) MX,2120A1,A3 -19-21OCT92 20 3