John Deere K Series Air-Cooled Engines — INSPECT PISTON

Cylinder Block, Valves and Internal Components/Inspect Piston 8. Measure piston pin outer diameter. Replace if less than specification. 9. Measure piston pin bore. Replace piston if measurement is greater than specification. SPECIFICATIONS M50064 -UN-31AUG88 M80327 -UN-11MAR91 Piston Pin O.D. Piston Bore I.D. (MIN) (MAX) 14.98 mm 15.05 mm (0.590 in.) (0.593 in.) CTM5 (20OCT92) 21-20-11 K Series Air Cooled Engine MX,2120A1,A18 -19-21OCT92 AllTractorManuals.com 220596 PN=126 6. Inspect piston for scoring or fractures. Replace piston if damaged. NOTE: Top ring is tapered and cannot be measured as shown. -UN-29AUG88 Inspect clearance visually. Replace piston if clearance appears excessive. 7.

Check ring grooves for wear at several points around piston. Replace piston if clearance is greater than M38102 specification. CLEARANCE SPECIFICATION (MAX) Top Ring Second Ring Oil Control Ring — 0.13 mm 0.17 mm (0.005 in.) (0.007 in.) MX,2120A1,A17 -19-21OCT92 21 20 11