John Deere K Series Air-Cooled Engines — INSPECT CONNECTING ROD

Cylinder Block, Valves and Internal Components/Inspect Connecting Rod INSPECT CONNECTING ROD 1. Clean and inspect rod. Replace if scored. 2. Analyze crankshaft and connecting rod wear. (See Section 100, Group 10.) M50066 -UN-31AUG88 3. Install connecting rod cap. Tighten cap screws to 19 N·m (168 lb-in.). 4. Measure connecting rod crankshaft bearing and piston bearing (A). Replace connecting rod if either measurement is greater than specifications. BEARING I.D. SPECIFICATIONS (MAX) Crankshaft Piston Bearing Bearing 27.06 mm 15.04 mm (1.065 in.) (0.592 in.) CTM5 (20OCT92) 21-20-12 K Series Air Cooled Engine MX,2120A1,A19 -19-21OCT92 AllTractorManuals.com 220596 PN=127 10. Measure piston O.D.

(A) perpendicular to piston pin bore. 11. Measure cylinder bore. (See Inspect Block in this group.) -UN-19MAR91 12. Subtract piston O.D. measurement (A) from cylinder bore measurement to determine piston-to-cylinder bore clearance. 13. Replace piston and/or rebore cylinder block if not M80328 within specifications. (See this group.) SPECIFICATIONS Piston O.D. (A) . . . . . . . . . . . . . 71.86—71.89 mm (2.829—2.830 in.) Piston-to-Cylinder Bore Clearance (std.) . . . . . . . . . 0.087—0.137 mm (0.0034—0.00 (max.) . . . . . . . . . . . . . . . 0.163 mm (0.0064 in.) MX,2120A1,A18A -19-21OCT92 21 20 12