Cylinder Block, Valves and Internal Components/Crankshaft REPLACE CRANKSHAFT BEARING SHELL 1. Drive old bearing (A) from crankcase using an appropriate bushing tool (B) and an arbor press. 2. Align new bearing so arrow head formed by oil grooves (C) points opposite to engine rotation (D). Align oil hole (E) in bearing with oil passage (F) in crankcase. M51527 -UN-31AUG88 M51526 -UN-31AUG88 3. Install new bearing to depth (G) 1 mm (0.039 in.) below flange surface.
A—Bearing B—Bushing Tool C—Oil Grooves D—Engine Rotation E—Oil Hole F—Oil Passage G—Installation Depth CTM5 (20OCT92) 21-20-15 K Series Air Cooled Engine MX,2120A1,A24 -19-21OCT92 AllTractorManuals.com 220596 PN=130 INSPECT CRANKSHAFT PLAIN BEARINGS NOTE: Cylinder block is fitted with a replaceable shell. 1. Remove crankshaft. (See this group.) -UN-11MAR91 2. Measure crankshaft bearings in cylinder block and crankcase cover. Replace cover or shell, if equipped, if diameter is greater than specifications. (See this group.) 3. Install crankshaft. M80263 BEARING I.D.
SPECIFICATIONS (MAX) Cylinder Block Cylinder Block Crankcase Cover Bearing Bearing 25.10 mm 24.50 mm (0.988 in.) (0.965 in.) -UN-11MAR91 M80333 Crankcase Cover MX,2120A1,A23 -19-21OCT92 21 20 15