John Deere K Series Air-Cooled Engines — MEASURE CRANKSHAFT END PLAY

Cylinder Block, Valves and Internal Components/Crankshaft CTM5 (20OCT92) 21-20-16 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=131 CHECK CRANKSHAFT ALIGNMENT (TIR) Place crankshaft into an alignment jig and rotate crankshaft slowly. Use dial indicators (A) to measure maximum total indicated runout (TIR). If not according to specification replace crankshaft. -UN-07SEP88 SPECIFICATIONS Maximum TIR . . . . . . . . . . . . . . . . . . . . . . . . . 0.05 mm (0.002 in.) M51761 MX,2120A1,A25 -19-21OCT92 21 20 MEASURE CRANKSHAFT END PLAY 1. Measure end play using dial indicator (A). 2. Move crankshaft in and out. Record this measurement.

-UN-19MAR91 Replace block or crankshaft if end play is not within specifications. SPECIFICATIONS M80296 End Play . . . . . . . . . . . . . . . . . . . . . . . 0—0.30 mm (0—0.012 in.) MX,2120A1,A26 -19-21OCT92 16