John Deere K Series Air-Cooled Engines — RECONDITION VALVE SEATS

Cylinder Block, Valves and Internal Components/Recondition Valve Seats 3. Finish reaming valve guide according to specifications, with stanisol or kerosene lubricant and a 6 mm valve guide reamer. Turn reamer clockwise. 4. Thoroughly clean valve area before assembly. SPECIFICATIONS M80359 -UN-02APR91 Bushing Finished I.D. . . . . . . . . . . . . 6—6.02 mm (0.236—0.237 in.) MX,2520A1,A6 -19-21OCT92 CTM5 (20OCT92) 25-20-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=161 RECONDITION VALVE SEATS 1. Inspect valve seats for damage. If seats are loose, warped or distorted beyond reconditioning, replace cylinder block. Pitted or worn seats can be refaced using a seat cutter.

-UN-31AUG88 2. To recondition valve seat, cut at 45˚ angle (B) to clean up seat. Cut narrowing angle (E) at 30˚. Finish cut at 45˚ (B) to establish seating surface width (A). M51558 3. Cut valve seating surface (A) as close as possible to specifications. 4. Lap valves to seats after refacing. (See Section 100, Group 05.) SPECIFICATIONS -UN-01SEP88 A—Valve Seating Surface . . . . . . 1.00—1.60 mm (0.039—0.063 in.) B—Valve Seat Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45˚ C—Valve Face Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45˚ D—Valve Margin . . . . . . . . . . . . . . . . . . . . . . . 0.60 mm (0.020 in.) E—Valve Narrowing Angle . . . . .

. . . . . . . . . . . . . . . . . . . . . . 30˚ M9552 MX,2520A1,A7 -19-21OCT92 25 20 4