John Deere K Series Air-Cooled Engines — CHECK VALVE-TO-TAPPET CLEARANCE

Cylinder Block, Valves and Internal Components/Check Valve-To-Tappet Clearance CTM5 (20OCT92) 25-20-5 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=162 5. Center valve seat on the valve face: —(A) shows correct position. —(B) shows incorrect. 6. Check seat for good contact using Prussian Blue Compound. -UN-07SEP88 M18615 MX,3015A1,A9 -19-21OCT92 25 20 5 CHECK VALVE-TO-TAPPET CLEARANCE NOTE: Valve grinding changes the valve-to-tappet clearance. Check clearance when engine is cold. 1. Install valves in cylinder block. -UN-02APR91 2. Turn flywheel until intake valve (A) is at its highest position.

Check clearance between valve (B) and tappet (C), with feeler gauge (D) and compare to specification. M80360 3. Perform same procedure for exhaust valve (B). 4. Grind end of valve stem to obtain proper clearance. A—Intake Valve VALVE CLEARANCE SPECIFICATIONS B—Exhaust Valve C—Tappet Exhaust . . . . . . . . . . . . . . . . . . . 0.21—0.23 mm (0.008—0.009 in.) D—Feeler Gauge Intake . . . . . . . . . . . . . . . . . . . . 0.12—0.18 mm (0.005—0.007 in.) MX,2520A1,A8 -19-21OCT92