John Deere K Series Air-Cooled Engines — INSPECT PISTON

Cylinder Block, Valves and Internal Components/Inspect Piston DISASSEMBLE, INSPECT AND ASSEMBLE PISTON AND CONNECTING ROD 1. Remove circlip, piston pin (B) and connecting rod (A). 2. Inspect all parts for wear or damage. Replace as necessary. (See procedures in this group.) M80371 -UN-02APR91 3. Apply a light film of oil to piston pin and connecting rod bearing. MX,2520A1,A16 -19-21OCT92 INSPECT PISTON 1. Analyze piston and piston ring wear. (See Section 100, Group 10.) 2. Remove piston rings. (See this group.) M29946 -UN-06SEP88 IMPORTANT: Do not use a caustic cleaning solution or a wire brush to clean piston. 3. Remove all deposits from the piston. 4.

Clean carbon from piston ring grooves with a ring groove cleaner (A). If cleaning tool is not available, break an old ring and use it carefully to clean groove. 5. Check that oil return passages in grooves are open. MX,2520A1,A18 -19-21OCT92 CTM5 (20OCT92) 25-20-11 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=168 4. Align “L” mark (A) on piston head with the Japanese characters (B) on the connecting rod. 5. Install piston pin and circlip. -UN-02APR91 M80372 MX,2520A1,A17 -19-21OCT92 25 20 11