John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL ENGINE COVER

Blower Housing and Flywheel/Remove and Install Engine Cover CTM5 (20OCT92) 30-10-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=195 REMOVE AND INSTALL ENGINE COVER NOTE: Fuel tank assembly is removed with engine cover. 1. Close fuel shut-off valve. -UN-07SEP88 2. Disconnect fuel hose (C). Close all openings using caps and plugs. 3. Remove recoil starter. M51746 4. Remove flywheel nut, cup and screen assembly (A) and spacers, if equipped. A—Cup and Screen Assembly 5. Remove oil filler cap and collars (B). B—Collar (4 used) C—Fuel Hose D—Adapter 6. Disconnect adapter (D). 7. Remove engine cover. 8. Inspect cover for wear or damage. Replace if necessary. 9.

Install engine cover and cup and screen assembly. 10. Adjust flywheel screen. (See this group.) 11. Connect adapter. 12. Install collars and filler cap. 13. Install spacers, if equipped, cup and screen assembly and flywheel nut. Tighten nut to 45 N·m (33 lb-ft). 14. Install recoil starter. 15. Connect fuel hose and open shut-off valve. MX,3010A1,A2 -19-21OCT92 30 10 2