Blower Housing and Flywheel/Remove and Install Brake Band—If Equipped FLYWHEEL SCREEN ADJUSTMENT Adjust gap (C) between the blades under screen (A) and engine cover (B) to specifications using spacers. SPECIFICATIONS M38037 -UN-29AUG88 Gap (Min) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 mm (0.059 in.) MX,3010A1,A3 -19-21OCT92 CTM5 (20OCT92) 30-10-3 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=196 REMOVE AND INSTALL BRAKE BAND—ZONE START MODELS 1. Remove engine cover. (See this group.) 2. Remove oil fill tube. -UN-07SEP88 3. Pry spring arm (A) over stop. 4. Remove pin and washer (B). M51754 NOTE: Remove engine cover mount stud when replacing brake band only. 5.
Inspect band for wear or damage. Replace if necessary. —Remove engine cover mount stud on end of band. —Replace brake band. —Apply thread lock and sealer (medium strength) on threads of engine cover mount stud. —Install brake band and stud. 6. Install brake band, washer and pin. 7. Install spring arm in front of stop. 8. Install oil fill tube. 9. Install engine cover. MX,3010A1,A4 -19-21OCT92 30 10 3