John Deere K Series Air-Cooled Engines — INSPECT VALVE GUIDES

Cylinder Head and Valves/Inspect INSPECT VALVE GUIDES Clean inside of valve guides with valve guide cleaner. Measure inside diameter of valve guides. Replace cylinder head if inside diameter is greater than specifications. (See this group.) M80169 -UN-11FEB91 SPECIFICATIONS (MAX) I.D. Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.55 mm (0.218 in.) Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.56 mm (0.219 in.) MX,3015A1,A7 -19-21OCT92 CTM5 (20OCT92) 30-15-6 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=203 INSPECT CYLINDER HEAD 1.

Remove carbon deposits from combustion chamber and gasket surface using SCOTCH-BRITE abrasive pads or an equivalent. -UN-11FEB91 2. Clean head with solvent. 3. Inspect for cracks or broken cooling fins. 4. Inspect gasket surface for burrs and nicks. M80168 5. Inspect head gasket for burns and traces of gas leakage. Replace if necessary. 6. Check that oil drainback passages are not plugged. 7. Put cylinder head on a surface plate. Check for distortion at several points around the head using a feeler gauge. Replace head if distortion is more than specifications. SPECIFICATIONS Cylinder Head Distortion (Max) . . . . . . . . . . . . . 0.07 mm (0.003 in.) MX,3015A1,A6 -19-21OCT92 30 15 6