John Deere K Series Air-Cooled Engines — INSPECT CYLINDER BLOCK

Cylinder Block and Internal Components/Inspect NOTE: A bare block is available for service. 5. Measure cylinder bore parallel with crankshaft and right angles to crankshaft at top and bottom of ring travel. 6. If cylinder bore exceeds wear limit, replace cylinder block or rebore cylinder. (See this group.) M51745 -UN-23FEB89 M80187 -UN-11FEB91 NOTE: If cylinder is rebored, oversize piston and rings must be installed. 7. Install crankshaft. CYLINDER BORE SPECIFICATIONS Standard Wear Limit 64.90—65.00 mm 65.06 mm (2.557—2.561 in.) (2.563 in.) 30 20 13 MX,3020A1,A25 -19-21OCT92 CTM5 (20OCT92) 30-20-13 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=218