Cylinder Block and Internal Components/Rebore Cylinder Block 8. Hone the cylinder an additional 0.028—0.030 mm (0.0011—0.0012 in.) for final bore specifications. This allows for 0.020 mm (0.0008 in.) shrinkage when cylinder cools. IMPORTANT: DO NOT use gasoline or commercial solvents to clean cylinder bores. Solvents will not remove metal particles produced during honing. 9. Clean the cylinder thoroughly using soap, warm water and clean rags. Continue to clean cylinder until white rags show no discoloration. 10. Dry the cylinder. Apply engine oil to cylinder wall.
M98,2040A,A9 -19-21OCT92 CTM5 (20OCT92) 30-20-15 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=220 INSPECT AND REPLACE OIL SLINGER—IF EQUIPPED 1. Remove crankcase cover. (See this group.) 2. Remove oil slinger (A). -UN-31AUG88 3. Inspect oil slinger. Replace if worn or damaged. 4. Install oil slinger. M50078 MX,3020A1,A28 -19-21OCT92 30 20 15