John Deere K Series Air-Cooled Engines — INSPECT VALVE SPRINGS

Cylinder Block, Valves and Internal Components/Inspect Valve Springs INSPECT VALVE SPRINGS Inspect valve springs. Replace springs if damaged or if free length is less than specification. SPECIFICATION M50036 -UN-31AUG88 Spring Free Length (MIN) . . . . . . . . . . . . . . . . 40.00 mm (1.570 in.) CTM5 (20OCT92) 35-20-2 K Series Air Cooled Engine MX,3520A1,A4 -19-21OCT92 AllTractorManuals.com 220596 PN=247 REMOVE AND INSTALL VALVES AND SPRINGS 1. Remove carburetor. (See Group 05.) 2. Remove cylinder head. (See Group 15.) -UN-31AUG88 3. Compress valve spring (C) with a valve spring compressor. 4. Remove collet halves (A). M51487 5. Slowly release compressor and remove valve. 6.

Remove spring, retainer (B) and tappet cap (D). 7. Inspect and analyze valves. (See Section 100, Group 05.) -UN-17MAY91 8. Inspect springs, valve guides and seats. (See this group.) 9. Check valve-to-tappet clearance. (See this group.) M80459 10. Install tappet caps. 11. Align valve springs and retainers in tappet chamber. A—Collet Halves 12. Coat valve stems with oil and install in cylinder B—Spring Retainer block. C—Spring D—Tappet Cap 13. Compress each spring and install collet halves. 14. Install cylinder head. 15. Install carburetor. MX,3520A1,A3 -19-21OCT92 35 20 2