John Deere K Series Air-Cooled Engines — CHECK VALVE-TO-TAPPET CLEARANCE

Cylinder Block, Valves and Internal Components/Check Valve-To-Tappet Clearance 5. Center valve seat on the valve face: —(A) shows correct position. —(B) shows incorrect. 6. Check seat for good contact using Prussian Blue Compound. M18615 -UN-07SEP88 MX,3015A1,A9 -19-21OCT92 CTM5 (20OCT92) 35-20-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=249 CHECK VALVE-TO-TAPPET CLEARANCE 1. Install tappet caps on tappets. 2. Install valves in cylinder block. -UN-17MAY91 3. Turn crankshaft until intake valve (A) is at its highest position. Check clearance between valve (B) and tappet cap (C), with feeler gauge (D) and compare to specifications. M80461 4.

Change tappet caps to obtain proper clearance. (See this group.) SPECIFICATIONS A—Intake Valve B—Exhaust Valve Valve Clearance . . . . . . . . . . . . . 0.17—0.27 mm (0.007—0.011 in.) C—Tappet Cap D—Feeler Gauge MX,3520A1,A7 -19-21OCT92 35 20 4