Cylinder Head and Valves/Rocker Arm Assembly—FC290V/FC400V/FC420V REMOVE AND INSTALL ROCKER ARM ASSEMBLY 1. Remove rocker arm cover. 2. Turn crankshaft until piston is at highest position in compression stroke. M50027 -UN-31AUG88 3. Remove rocker shaft and arms (A). IMPORTANT: Mark push rods for reassembly in original locations. 4. Remove push rods (B). IMPORTANT: Align rocker arms over push rods during assembly. 5. Install push rods and rocker arm assemblies. 6. Check valve clearance.
(See this group.) MX,4015A1,A2 -19-21OCT92 CTM5 (20OCT92) 40-15-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=303 INSPECT ROCKER ARM ASSEMBLY Measure outside diameter of rocker shaft and inside diameter or rocker arm bearing. Replace if not according to specifications. -UN-31AUG88 SPECIFICATIONS Minimum Shaft O.D. . . . . . . . . . . . . . . . . . . . 12.94 mm (0.509 in.) Maximum Arm I.D. . . . . . . . . . . . . . . . . . . . . 13.07 mm (0.515 in.) M50028 -UN-31AUG88 M50029 MX,4015A1,A3 -19-21OCT92 40 15 2