Cylinder Head and Valves/Remove and Install Inspect push rod for bend using V-blocks and a dial indicator. Turn rod slowly and read variation on indicator. Replace if variation is greater than specification. SPECIFICATION Push Rod Bend (MAX) . . . . . . . . . . . . . . . . . . 0.30 mm (0.012 in.) M50044 -UN-31AUG88 MX,4015A1,A3A -19-21OCT92 CTM5 (20OCT92) 40-15-3 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=304 REMOVE AND INSTALL CYLINDER HEAD ASSEMBLY 1. Remove blower housing. (See Group 10.) 2. Remove carburetor. (See Group 05.) -UN-09JAN91 3. Remove rocker arm assembly. (See this group.) 4. Remove shields (A and B). M54488 5. Remove spark plug. FC290V 6.
Remove cylinder head assembly. 7. Make repairs as necessary. (See procedures in this group.) -UN-09JAN91 M80162 FC400V/FC420V/FC540V MX,4015A1,A4 -19-21OCT92 40 15 3