Cylinder Head and Valves/Remove and Install CTM5 (20OCT92) 40-15-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=305 IMPORTANT: Gasket surfaces are coated with sealant. Do not damage surfaces or gasket during installation. 8. Install cylinder head assembly with new gasket. Install cap screws and tighten finger tight. -UN-31AUG88 9. Tighten cap screws in sequence shown. Tighten to initial torque specifications. 10. On FC290V continue in sequence, 3 N·m (27 lb-in.) M50046 at a time, until final torque is as specified. On FC400V, FC420V and FC540V, continue in sequence, 7 N·m (62 lb-in.) at a time, until final torque is as specified. 11.
Install spark plug and tighten to specification. 12. Install shields. 13. Check valve clearance. (See this group.) TORQUE SPECIFICATIONS Initial Torque FC290V . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 N·m (159 lb-in.) FC400V/FC420V/FC540V . . . . . . . . . . . . . . . . . 32 N·m (24 lb-ft) Final Torque FC290V . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 N·m (212 lb-in.) FC400V/FC420V/FC540V . . . . . . . . . . . . . . . . . 52 N·m (38 lb-ft) Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 N·m (177 lb-in.) MX,4015A1,A5 -19-21OCT92 40 15 4