Cylinder Block and Internal Components/Remove, Inspect and Install Tappets 6. On FC290V engines, check that tab (A) sits just above cam lobe when weight is released. Tab should rotate 90˚ and drop below cam lobe when weight is operated. 7. Replace camshaft if it does not operate properly. M50058 -UN-31AUG88 8. Install camshaft. MX,4020A1,A8 -19-21OCT92 CTM5 (20OCT92) 40-20-5 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=316 REMOVE, INSPECT AND INSTALL TAPPETS 1. Remove camshaft. (See this group.) NOTE: Mark tappets so they can be installed in their original bores during assembly. -UN-29AUG88 2. Remove tappets (A). 3. Inspect tappets for wear or damage. Replace if necessary.
M38092 4. Apply clean engine oil to tappets and bores. 5. Install tappets in original bores. 6. Install camshaft. MX,4020A1,A9 -19-21OCT92 40 20 5