Cylinder Block and Internal Components/Inspect Automatic Compression Release INSPECT CAMSHAFT PLAIN BEARINGS 1. Remove camshaft. (See this group.) 2. Measure camshaft bearings in cylinder block and crankcase cover. Replace block or cover if diameter is greater than specification. M54492 -UN-09JAN91 M54491 -UN-09JAN91 3. Install camshaft.
SPECIFICATIONS (MAX) Cylinder Block Crankcase Cover Cylinder Block Bearing Bearing FC290V 16.06 mm 14.05 mm (0.632 in.) (0.553 in.) FC400V/ 20.08 mm 21.08 mm FC420V (0.790 in.) (0.830 in.) FC540V 21.08 mm 21.08 mm (0.830 in.) (0.830 in.) Crankcase Cover MX,4020A1,A6 -19-21OCT92 CTM5 (20OCT92) 40-20-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=315 INSPECT AUTOMATIC COMPRESSION RELEASE (A.C.R.) 1. Remove camshaft. (See this group.) 2. Inspect automatic compression release (A.C.R.) for -UN-09JAN91 damage. 3. Inspect spring (A). Replace if worn or damaged. 4. Move weight(s) (B) by hand to check for proper M54493 operation. 5.
On FC400V, FC420V and FC540V engines, check that tab (C) sits slightly above cam lobe when weights are released. Tab should drop below cam when weights are operated. MX,4020A1,A7 -19-21OCT92 40 20 4