John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL RECIPROCATING BALANCER

Cylinder Block and Internal Components/Reciprocating Balancer CTM5 (20OCT92) 40-20-7 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=318 REMOVE AND INSTALL RECIPROCATING BALANCER 1. Remove flywheel. (See Group 10.) 2. Remove camshaft. (See this group.) 3. Remove piston. (See this group.) 4. Remove support shaft (A). 5. Remove crankshaft with balancer assembly (B). 6. Make repairs as necessary. (See procedures in this group.) 7. Inspect oil seals. (See this group.) 8. Cover keyway on flywheel end of crankshaft with tape to prevent damage to seal (C) when installing assembly. -UN-07SEP88 9. Put light film of oil on crankshaft bearing surfaces. 10.

Install balancer assembly with crankshaft into crankcase (D). M51758 11. Tighten balancer nut to 7 N·m (65 lb-in.). 12. Align balancer weight in crankcase and install A—Support Shaft support shaft. B—Balancer Assembly C—Seal 13. Adjust crankshaft end play. (See this group.) D—Crankcase MX,4020A1,A11 -19-21OCT92 40 20 7