Cylinder Block and Internal Components/Reciprocating Balancer REPLACE BALANCER BUSHINGS NOTE: Remove bushings with a bearing driver or a press. Remove link rod bushings with oil groove side facing up. M51681 -UN-31AUG88 1. Remove bushings. 2. Install link rod bushings with seam (A) at a 90˚ angle to centerline (C). NOTE: On FC400V, FC420V and FC540V engines, install bushing from opposite side of oil grooves A—Bushing Seam B—Oil Grooves (B). C—Link Rod Centerline D—Measurement 3. Install bushing below surface to specifications. SPECIFICATIONS Bushing Depth (D) . . . . . . . . . . . . . . . . . . . . .
1.00 mm (0.040 in.) MX,4020A1,A14 -19-21OCT92 CTM5 (20OCT92) 40-20-10 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=321 FC400V, FC420V and FC540V: 4. Align oil hole (A) in bushing and oil passage (B) in weight. Install bushing. 5. Install bushing below surface to specifications. -UN-07SEP88 SPECIFICATIONS Bushing Depth (C) . . . . . . . . . . . . . . . . . . . . . 0.50 mm (0.020 in.) M51725 M98,2030A,A7 -19-21OCT92 40 20 10