John Deere K Series Air-Cooled Engines — INSPECT CYLINDER BLOCK

Cylinder Block and Internal Components/Inspect CTM5 (20OCT92) 40-20-22 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=333 NOTE: A bare block is available for service. 5. Measure cylinder bore parallel with crankshaft and right angles to crankshaft at top and bottom of ring travel. -UN-23FEB89 6. If cylinder bore exceeds wear limit, replace cylinder block or rebore cylinder. (See this group.) NOTE: If cylinder is rebored, oversize piston and rings must be installed. M51745 7. Install crankshaft.

CYLINDER BORE SPECIFICATIONS Standard Wear Limit FC290V 77.98—78.00 mm 78.07 mm -UN-09JAN91 (3.070—3.071 in.) (3.074 in.) FC400V 86.98—87.00 mm 87.08 mm (3.424—3.425 in.) (3.428 in.) FC420V 88.98—89.00 mm 89.08 mm M54496 (3.503—3.504 in.) (3.507 in.) FC540V 88.98—89.00 mm 89.08 mm (3.503—3.504 in.) (3.507 in.) MX,4020A1,A34 -19-21OCT92 40 20 22