Cylinder Block and Internal Components/Oil Pump—FC400V/FC420V INSPECT AND REPLACE OIL SLINGER—FC290V 1. Remove crankcase cover. (See this group.) 2. Remove oil slinger (A). M50078 -UN-31AUG88 3. Inspect oil slinger. Replace if worn or damaged. 4. Install oil slinger. MX,4020A1,A37 -19-21OCT92 CTM5 (20OCT92) 40-20-25 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=336 DISASSEMBLE AND ASSEMBLE OIL PUMP—FC400V/FC420V 1. Remove crankcase cover. (See this group.) 2. Remove oil pump gear (A). -UN-09JAN91 IMPORTANT: Remove rotor shaft and oil pump cover together to avoid damaging governor. 3. Remove oil pump assembly (B). M80018 4. Remove relief spring and ball (C). 5. Inspect all parts.
(See this group.) NOTE: Install gear (A) with recess facing away from crankcase cover. 6. Install oil pump assembly. MX,4020A1,A38 -19-21OCT92 40 20 25