John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL CAMSHAFT

Cylinder Block and Internal Components/Camshaft REMOVE AND INSTALL CRANKCASE COVER NOTE: Approximate crankcase oil capacity is 1.1 L (2.33 pt). 1. Drain crankcase. M53069 -UN-11APR89 2. Remove crankcase cover and gasket. 3. Clean crankcase and crankcase cover gasket surfaces. NOTE: Do not force cover. Gears must mesh for proper positioning. FE290D: Install stud in position (1). 4. Install gasket and cover. Tighten cap screws using the sequence shown. TORQUE SPECIFICATIONS Mounting Cap Screws . . . . . . . . . . . . . . . . . . . . 26 N·m (230 lb-in.) Oil Drain Plug . . . . . . . . . . . . . . . . . . . . . . . . . .

21 N·m (186 lb-in.) MX,4520A1,A2 -19-21OCT92 CTM5 (20OCT92) 45-20-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=383 REMOVE AND INSTALL CAMSHAFT 1. Remove crankcase cover. (See this group.) 2. Remove crankshaft shim(s) (A). -UN-25APR91 IMPORTANT: Align timing marks to prevent damage to tappets when removing camshaft. 3. Rotate crankshaft until timing marks (B) align. M80412 4. Remove camshaft (C). 5. Inspect camshaft. (See this group.) 6. Apply clean engine oil to camshaft lobes and journals. 7. Align timing marks and install camshaft. 8. Install shim(s) on crankshaft. 9. Install crankcase cover. MX,4520A1,A3 -19-21OCT92 45 20 2