Cylinder Block and Internal Components/Camshaft INSPECT CAMSHAFT Inspect camshaft for worn or broken teeth. NOTE: Camshaft and tappets are a matched set. Replace both camshaft and tappets if necessary. M80413 -UN-25APR91 Measure PTO side journal (C), flywheel side journal (A), and lobes (B). Replace camshaft and tappets if less than specifications. SPECIFICATIONS (MIN) PTO Side Flywheel Side Cam Lobes Journal Journal 22.93 mm 22.93 mm 32.70 mm (0.903 in.) (0.903 in.) (1.287 in.) MX,4520A1,A4 -19-21OCT92 CTM5 (20OCT92) 45-20-3 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=384 INSPECT CAMSHAFT PLAIN BEARINGS 1. Remove camshaft. (See this group.) 2.
Measure camshaft bearings in cylinder block and crankcase cover. Replace block or cover if diameter is -UN-25APR91 greater than specification. 3. Install camshaft. SPECIFICATIONS (MAX) M80414 Cylinder Block Crankcase Cover Cylinder Block Bearing Bearing 23.06 mm 23.06 mm (0.908 in.) (0.908 in.) -UN-25APR91 M80415 Crankcase Cover MX,4520A1,A5 -19-21OCT92 45 20 3