John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL PISTON AND CONNECTING ROD

Cylinder Block and Internal Components/Piston and Connecting Rod REPLACE LINK ROD BUSHINGS NOTE: Replace bushings using a bearing, bushing and seal driver set and a press. 1. Remove bushings using a bushing, bearing and seal driver set and a press. M80424 -UN-25APR91 2. Install link rod bushings with seam (A) at a 90˚ angle to centerline (B). 3. Install bushing below surface to specifications. SPECIFICATIONS Bushing Depth . . . . . . . . . . . . . . . . . . . . . . . . 1.00 mm (0.040 in.) MX,4520A1,A11 -19-21OCT92 CTM5 (20OCT92) 45-20-8 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=389 REMOVE AND INSTALL PISTON AND CONNECTING ROD 1. Remove cylinder head. (See Group 15.) 2.

Remove crankcase cover. (See this group.) -UN-25APR91 3. Loosen governor arm nut and rotate governor shaft (B). 4. Remove carbon and varnish from top of cylinder bore M80425 with a ridge reamer. 5. Remove cap screws and connecting rod cap (A). 6. Push piston and connecting rod from cylinder bore. 7. Make repairs as necessary. (See procedures in this group.) MX,4520A1,A12 -19-21OCT92 45 20 8