John Deere K Series Air-Cooled Engines — REPLACE IGNITOR

Ignition and Charging System/Replace Ignitor ADJUST ARMATURE AIR GAP 1. Turn flywheel magnet away from armature. 2. Insert feeler gauge blade (B), between flywheel and armature. M80447 -UN-25APR91 3. Push armature against flywheel and tighten screws (B). 4. Turn flywheel to remove feeler gauge. AIR GAP SPECIFICATIONS Feeler Gauge Blade . . . . . . . . . . . . . . . . . . . . 0.30 mm (0.012 in.) MX,4525A1,A3 -19-21OCT92 REPLACE IGNITOR 1. Disconnect wiring lead (A). 2. Remove ignitor. 3. Install ignitor. M80448 -UN-25APR91 4. Connect wiring lead. MX,4525A1,A4 -19-21OCT92 45 25 2 CTM5 (20OCT92) 45-25-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=407