John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL ARMATURE WITH COIL

Group 25 Ignition and Charging System REMOVE AND INSTALL STATOR 1. Remove flywheel. (See Group 10.) 2. Disconnect stator wiring leads (B). 3. Remove clamp (A). 4. Remove rubber grommet (C) and wiring leads from crankcase. M80445 -UN-25APR91 5. Remove stator (D). 6. Install stator. 7. Install wiring leads and rubber grommet. 8. Install clamp. A—Clamp B—Wiring Leads C—Rubber Grommet 9. Connect stator wiring leads. D—Stator 10. Install flywheel. MX,4525A1,A1 -19-21OCT92 CTM5 (20OCT92) 45-25-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=406 REMOVE AND INSTALL ARMATURE WITH COIL 1. Remove blower housing. (See Group 10.) 2. Disconnect wiring lead (A). -UN-25APR91 3.

Remove cap screws (C) and armature with coil (B). 4. Loosely install armature with coil. M80446 5. Connect wiring lead. 6. Adjust armature air gap. (See this group.) 7. Install blower housing. MX,4525A1,A2 -19-21OCT92 45 25 1