Starting Systems/Electric Starter REPLACE SPRING N CAUTION: Spring is wound under great tension in reel or spring case. Do not let spring fly loose. Hold spring firmly in place while replacing. M54497 -UN-09JAN91 1. Working from the center out, carefully unwind spring from spring case. 2. Hook outside spring tang in case. Wind spring into spring case, working toward center. MX,4530A1,A3 -19-21OCT92 CTM5 (20OCT92) 45-30-3 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=410 ANALYZE ELECTRIC STARTER CONDITION 1. The starter overheats because of: • Long cranking. • Armature binding. 2. The starter operates poorly because of: • Armature binding. • Dirty or damaged starter drive.
• Badly worn brushes or weak brush springs. • Excessive voltage drop in cranking system. • Battery or wiring defective. • Shorts, opens, or grounds in armature. NOTE: Starter repair is limited to brushes, end caps, and starter drive. Fields in starter are permanent magnets and are not serviceable. If housing or armature is damaged, replace starter. MX,4530A1,A4 -19-21OCT92 45 30 3