Group 10 Blower Housing and Flywheel REMOVE AND INSTALL BLOWER HOUSING—RECOIL START 1. Disconnect spark plug cap. 2. Remove air cleaner assembly. 3. Remove dipstick tube (B). 4. Remove recoil starter (C) and guard. 5 Remove starter cup (D) and spacer(s). 6. Remove cap screws (A and E) and blower housing. 7. Install blower housing. 8. Install spacer(s) and starter cup. 9. Adjust flywheel screen. (See this group.) TY13365 -UN-23AUG88 10. Install recoil starter and guard. 11. Install dipstick tube. 12. Install air cleaner assembly.
A—Cap Screws B—Dipstick Tube C—Recoil Starter D—Starter Cup E—Cap Screws MX,5010A1,A1 -19-21OCT92 50 10 1 CTM5 (20OCT92) 50-10-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=426