John Deere K Series Air-Cooled Engines — SERVICE AIR CLEANER

Fuel and Air Systems/Service 4. Check that drainback hole (A) in bottom breather chamber is open before installing breather valve. 5. Install breather valve, gasket and cover. 6. Install flywheel. M38043 -UN-29AUG88 MX,5005A1,A7 -19-21OCT92 CTM5 (20OCT92) 50-05-6 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=425 SERVICE AIR CLEANER 1. Remove and disassemble air cleaner. IMPORTANT: Do not clean paper element. -UN-31AUG88 2. Wash foam element (A) in detergent and water. Dry element. 3. Put 12—15 drops of engine oil on foam element (A). Squeeze out excess oil. M50023 4. Replace paper element (B) if: —Element is oily, dirty, bent, torn, crushed, or obstructed in any way.

A—Foam Element —Seal is damaged. B—Paper Element —Engine performance is poor. C—Body D—Gasket E—Base 5. Inspect body (C), gasket (D), and base (E) for damage. Replace if necessary. IMPORTANT: Any time air cleaner base is removed, use a silicon sealant (flexible sealant or RTV) on the outside diameter of the breather hose where it is inserted into the aluminum air intake housing. 6. Assemble and install air cleaner. NOTE: After air cleaner assembly is installed, check for free choke operation. MX,5005A1,A8 -19-21OCT92 50 05 6