John Deere K Series Air-Cooled Engines — RECONDITION VALVE SEATS

Cylinder Block, Valves and Internal Components/Recondition Valve Seats 3. Finish reaming valve guide bushings with stanisol or kerosene lubricant and a JDG497 8 mm, Valve Guide Reamer. Turn reamer clockwise. 4. Thoroughly clean valve area before assembly. FINISHED I.D. SPECIFICATIONS M38129 -UN-29AUG88 Valve Guides . . . . . . . . . . . . . . . . . . . . 8—8.02 mm (0.315—0.316) MX,5020A1,A7 -19-21OCT92 RECONDITION VALVE SEATS 1. Inspect valve seats for damage. If seats are loose, warped or distorted beyond reconditioning, replace cylinder head. Pitted or worn seats can be refaced using a seat cutter. M51558 -UN-31AUG88 M9552 -UN-01SEP88 2.

To recondition valve seat, cut a 45˚ angle (B) to clean up seat. Cut narrowing angle (E) at 30˚. Finish cut at 45˚ (B) to establish seating surface width (A). 3. Cut valve seating surface (A) as close as possible to specifications. 4. Lap valves to seats after refacing. (See Section 100, Group 05.) SPECIFICATIONS A—Valve Seating Surface . . . . . . . . . . . . . . . . 1.30 mm (0.050 in.) B—Valve Seat Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45˚ C—Valve Face Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45˚ D—Valve Margin . . . . . . . . . . . . . . . . . . . . . . . 0.60 mm (0.020 in.) E—Valve Narrowing Angle . . . . . . . . . . . . . . . . . .

. . . . . . . . . 30˚ MX,5020A1,A8 -19-21OCT92 50 20 5 CTM5 (20OCT92) 50-20-5 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=436