Cylinder Block, Valves and Internal Components/Replace Valve Guide Bushings INSPECT VALVE SPRINGS Inspect valve springs. Replace springs if damaged or if free length is less than specification. FREE LENGTH SPECIFICATION (MIN) M50036 -UN-31AUG88 Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43.30 mm (1.710 in.) Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39.00 mm (1.540 in.) MX,5020A1,A3 -19-21OCT92 INSPECT VALVE GUIDES Clean inside of valve guides with valve guide cleaner. Measure inside diameter of valve guide bushings (A). Replace bushings if inside diameters are greater than specifications.
(See this group.) M38126 -UN-29AUG88 SPECIFICATIONS (MAX) I.D. Intake and Exhaust . . . . . . . . . . . . . . . . . . . . . 8.08 mm (0.318 in.) MX,5020A1,A4 -19-21OCT92 REPLACE VALVE GUIDE BUSHINGS 1. Drive valve guide bushing into tappet chamber (B) using JDG118 Valve Guide Driver (A). Use a locking pliers to crush end of bushing in chamber. Drive remaining part of bushing into chamber and remove. M38127 -UN-29AUG88 MX,5020A1,A5 -19-21OCT92 CTM5 (20OCT92) 50-20-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=435 2. Use valve guide driver to install new bushing (A).
Drive bushing into cylinder body until distance (B), from valve seat counterbore to top of bushing, is according specifications. -UN-29AUG88 SPECIFICATIONS Distance (B) . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mm (1.178 in.) M38128 MX,5020A1,A6 -19-21OCT92 50 20 4