John Deere K Series Air-Cooled Engines — INSPECT CAMSHAFT PLAIN BEARINGS

Cylinder Block, Valves and Internal Components/Camshaft INSPECT CAMSHAFT Inspect camshaft for worn or broken teeth. NOTE: Camshaft and tappets are a matched set. Replace both camshaft and tappets if necessary. M80172 -UN-11FEB91 Measure PTO side journal (A), flywheel side journal (B), and lobes (C). Replace camshaft and tappets if less than specifications. SPECIFICATIONS (MIN) PTO Side Flywheel Side Cam Lobes Journal Journal 19.91 mm 15.91 mm 35.40 mm (0.784 in.) (0.627 in.) (1.395 in.) MX,5020A1,A12 -19-21OCT92 CTM5 (20OCT92) 50-20-8 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=439 INSPECT CAMSHAFT PLAIN BEARINGS 1. Remove camshaft. (See this group.) 2.

Measure camshaft bearings in cylinder block and oil pump cover. Replace block or cover if diameter is -UN-19FEB91 greater than specification. 3. Install camshaft. SPECIFICATIONS (MAX) M54785 Cylinder Block Oil Pump Cover Cylinder Block Bearing Bearing 16.07 mm 20.07 mm (0.633 in.) (0.790 in.) -UN-19FEB91 M54786 Oil Pump Cover MX,5020A1,A13 -19-21OCT92 50 20 8