John Deere K Series Air-Cooled Engines — REMOVE, INSPECT AND INSTALL TAPPETS

Cylinder Block, Valves and Internal Components/Remove, Inspect and Install Tappets REMOVE, INSPECT AND INSTALL TAPPETS 1. Remove camshaft. (See this group.) NOTE: Mark tappets so they can be installed in their original bores during assembly. M38092 -UN-29AUG88 2. Remove tappets (A). 3. Inspect tappets for wear or damage. Replace if necessary. 4. Apply clean engine oil to tappets and bores. 5. Install tappets in original bores. 6. Install camshaft. MX,5020A1,A14 -19-21OCT92 50 20 9 CTM5 (20OCT92) 50-20-9 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=440