Cylinder Block, Valves and Internal Components/Reciprocating Balancer CTM5 (20OCT92) 50-20-10 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=441 REMOVE AND INSTALL RECIPROCATING BALANCER 1. Remove flywheel. (See Group 10.) 2. Remove camshaft. (See this group.) 3. Remove piston. (See this group.) 4. Remove support shaft (A). 5. Remove crankshaft with balancer assembly (B). 6. Make repairs as necessary. (See procedures in this group.) 7. Inspect oil seals. (See this group.) 8. Cover keyway on flywheel end of crankshaft with tape to prevent damage to seal (C) when installing assembly. -UN-07SEP88 9. Put light film of oil on crankshaft bearing surfaces. 10.
Pack lithium based grease in oil seals. M51758 11. Install balancer assembly with crankshaft into crankcase (D). 12. Align balancer weight in crankcase and install A—Support Shaft support shaft. B—Balancer Assembly C—Seal 13. Adjust crankshaft end play. (See this group.) D—Crankcase 14. Install Support shaft bushing nut and torque to 7.3 N·m (65 lb-in.). 15. Install piston. 16. Install camshaft. 16. Install flywheel. MX,5020A1,A15 -19-21OCT92 50 20 10