John Deere K Series Air-Cooled Engines — DISASSEMBLE AND ASSEMBLE RECIPROCATING BALANCER

Cylinder Block, Valves and Internal Components/Reciprocating Balancer DISASSEMBLE AND ASSEMBLE RECIPROCATING BALANCER 1. Remove collar (A), gear (G), key (F) and spacer (H). 2. Remove rods (B) and crankshaft (I). 3. Inspect crankshaft. (See this group.) 4. Inspect balancer assembly. (See this group.) 5. Put a light film of oil on bearing surfaces. NOTE: Oil grooves of link rods (B) must face away from crankwebs. 6. Install balance weight to crankshaft with oil hole (E), if equipped, facing flywheel side. 7. Install collar (A). M51759 -UN-07SEP88 8. Install spacer (H) with chamfered face toward link rod. 9. Install key and crank gear.

A—Collar B—Link Rod C—Wrist Pin D—Balance Weight E—Oil Hole F—Woodruff Key G—Crank Gear H—Spacer I—Crankshaft MX,5020A1,A16 -19-21OCT92 50 20 11 CTM5 (20OCT92) 50-20-11 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=442