Cylinder Block, Valves and Internal Components/Inspect Piston 6. Inspect piston for scoring or fractures. Replace piston if damaged. NOTE: Inspect clearance visually. Replace piston if clearance appears excessive. 7. Check ring grooves for wear at several points around piston. Replace piston if clearance is greater than specification. M38102 -UN-29AUG88 CLEARANCE SPECIFICATION (MAX) Top Ring Second Ring Oil Control Ring 0.16 mm 0.14 mm 0.19 mm (0.006 in.) (0.005 in.) (0.007 in.) MX,5020A1,A24 -19-21OCT92 CTM5 (20OCT92) 50-20-15 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=446 8. Measure piston pin outer diameter. Replace if less than specification. 9. Measure piston pin bore.
Replace piston if measurement is greater than specification. -UN-31AUG88 SPECIFICATIONS Piston Pin O.D. Piston Bore I.D. (MIN) (MAX) M50064 20.98 mm 21.03 mm (0.827 in.) (0.829 in.) -UN-31AUG88 M50065 MX,5020A1,A25 -19-21OCT92 50 20 15