Cylinder Block, Valves and Internal Components/Piston and Connecting Rod 10. Measure piston O.D. (A) perpendicular to piston pin bore. 11. Measure cylinder bore. (See Inspect Block in this group.) 12. Subtract piston O.D. measurement (A) from cylinder bore measurement to determine piston-to-cylinder bore clearance. M80398 -UN-06APR91 13. Replace piston and/or rebore cylinder block if not within specifications. (See this group.) SPECIFICATIONS Piston O.D. (A) . . . . . . . . . . . 88.81—88.83 mm (3.4991—3.4999 in.) Piston-to-Cylinder Bore Clearance . . . . . . . . . . . . . . . . . . . .
0.156 mm (0.0061 in.) MX,5020A1,A26 -19-21OCT92 CTM5 (20OCT92) 50-20-16 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=447 INSPECT CONNECTING ROD 1. Clean and inspect rod. Replace if scored. 2. Analyze crankshaft and connecting rod wear. (See Section 100, Group 10.) -UN-31AUG88 3. Install connecting rod cap. Tighten to 20 N·m (177 lb-in.) 4. Measure connecting rod crankshaft bearing and piston M50066 bearing (A). Replace connecting rod if either measurement is greater than specifications. BEARING I.D. SPECIFICATIONS (MAX) Crankshaft Piston Bearing Bearing 37.02 mm 21.01 mm (1.459 in.) (0.829 in.) MX,5020A1,A27 -19-21OCT92 50 20 16