John Deere K Series Air-Cooled Engines — REMOVE, INSPECT AND INSTALL CRANKSHAFT

Cylinder Block, Valves and Internal Components/Crankshaft REMOVE, INSPECT AND INSTALL CRANKSHAFT 1. Remove camshaft. (See this group.) 2. Remove piston and connecting rod. (See this group.) M54789 -UN-19FEB91 3. Remove balancer. (See this group.) 4. Remove crankshaft from balancer. (See Disassemble and Assemble Balancer in this group.) IMPORTANT: A bent crankshaft must be replaced; it cannot be straightened. 5. Check crankshaft alignment (T.I.R.). (See this group.) 6. Clean and inspect crankshaft. Replace if parts are scratched or damaged. 7. Analyze crankshaft and connecting rod wear. (See Section 100, Group 10.) 8. Measure crankshaft main bearing journals and connecting rod journal.

Replace crankshaft if measurements are less than specifications. JOURNAL SPECIFICATIONS (MIN) Main Bearing Journal Connecting PTO Side Flywheel Rod Journal Side 34.91 mm 36.95 mm (1.374 in.) (1.455 in.) MX,5020A1,A30 -19-21OCT92 50 20 18 CTM5 (20OCT92) 50-20-18 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=449