John Deere K Series Air-Cooled Engines — SERVICE BREATHER—FA130D-AS16/AS19

Fuel and Air Systems—FA130D/Service Breather IMPORTANT: Do not push on float or inlet needle valve when adjusting float level. 5. Adjust float level. With carburetor upside down, float surface must be parallel (A) to carburetor body. Bend tang (B) to adjust float surface angle. TY15085 -UN-02SEP88 20 05 5 MX,2005A1,A7 -19-21OCT92 SERVICE BREATHER—FA130D-AS16/AS19 NOTE: The tappet chamber cover is an oil breather. 1. Remove fuel tank. (See this group.) M80238 -UN-11MAR91 2. Remove throttle lever assembly (B). 3. Remove tappet chamber cover/breather and gasket (A). 4. Clean cover/breather and tube. Inspect for cracks or damage. Replace if necessary. 5. Install new gasket and cover/breather. 6.

Install throttle lever assembly. 7. Install fuel tank. MX,2005A1,A8 -19-21OCT92 CTM5 (20OCT92) 20-05-5 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=38