John Deere K Series Air-Cooled Engines — LAP VALVES

Valves/Valves Using old or stale gasoline is a common cause for sticky valves (A). This gummy deposit can be seen on the valve. When this condition exists, the carburetor may also contain gum deposits and will require a complete cleaning. M29936 -UN-06SEP88 Always use fresh gasoline and drain fuel tank, lines, and carburetor before storing tractor. MX,2415G,39 -19-21OCT92 LAP VALVES 1. If seat does not make proper contact, lap the valve into the seat. 2. Apply small amount of fine lapping compound to face of valve. M50041 -UN-31AUG88 3. Grip top of valve with a vacuum cup tool. Turn valve to lap valve to seat. 4. Lift valve from seat every 8 to 10 strokes.

Lap until a uniform ring appears around the surface of the valve face. 5. Wash all parts in solvent to remove lapping compound. Dry parts. 6. Check position of lap mark on valve face. Lap mark must be on or near center of valve face. MX10005A1,A3 -19-21OCT92 100 05 3 CTM5 (20OCT92) 100-05-3 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=476