John Deere K Series Air-Cooled Engines — ANALYZE VALVES

Valves/Valves Valve stem corrosion is caused by moisture in the engine. Moisture in the fuel-air-mixture can condense inside the engine when the engine is stopped and cools down. Valve corrosion can also occur during storage. Fogging or pouring oil in the combustion chamber before storing helps prevent valve corrosion. M5563 -UN-31AUG88 Corroded or pitted valves collect deposits and may cause sticking valves. Replace badly corroded or pitted valves. MX,2415G,37 -19-21OCT92 Exhaust valves are designed to function in temperatures exceeding (2760˚C) 5000˚F. However, when operating at high temperatures for long periods of time, valve burning may occur.

Valves running too hot will show a dark discoloration of the valve stem into the area protected by the valve guide. Another indication is distortion of the valve margin (A) and valve face (B). Valve inserts may also begin to burn away. M30024 -UN-06SEP88 IMPORTANT: Do not run the engine with blower housing removed. Poor engine cooling due to dirt or obstructions is a common cause for overheating an engine and the valves. Remove blower housing and clean the engine cooling fins. Other causes for valves running hot are worn valve guides or valve springs, incorrect valve clearance, lean fuel-air mixture and incorrect or overheated spark plug.

MX,2415G,38 -19-21OCT92 100 05 2 CTM5 (20OCT92) 100-05-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=475