Piston, Piston Rings, Crankshaft and Connecting Rod/Analyze Vertical scratches (A) across the piston rings are due to an abrasive in the engine. Abrasives may be airborne, may have been left in the engine during overhaul or may be loose lead and carbon deposits. When this condition exists, check for one or more of the following: 1. Damaged, collapsed or improperly installed air filter. M29945 -UN-06SEP88 2. Loose connection or damaged gasket between air cleaner and carburetor. 3. Air leak around carburetor-to-cylinder block gasket. 4. Air leakage around throttle shaft. 5. Failure to properly clean cylinder bore after reconditioning engine.
MX,2420G,70 -19-21OCT92 Abrasive particles in engine oil cause scratches on side rails (A) of oil control ring. Inner spacer (B) wear or distortion may case: —High oil consumption. —Increased deposits in combustion chamber. —Sticking compression rings. M38101 -UN-29AUG88 Increased oil consumption may be caused by: —Worn side rails with low tension. —Worn or distorted inner spacer. MX,2420G,24 -19-21OCT92 100 10 2 CTM5 (20OCT92) 100-10-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=479