Group 10 Blower Housing and Flywheel REMOVE AND INSTALL BLOWER HOUSING—FA130D AND FA210D-AS20 NOTE: It is not necessary to remove recoil starter from housing. 1. Disconnect spark plug cap (A). M80242 -UN-11MAR91 2. Remove fuel tank, if equipped. (See this group.) 20 10 1 3. Disconnect wiring lead (C). 4. Remove blower housing (B). 5. Install blower housing. 6. Connect wiring lead. 7. Install fuel tank, if equipped. 8. Connect spark plug cap. MX,2010A1,A1 -19-21OCT92 CTM5 (20OCT92) 20-10-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=54