John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL CYLINDER HEAD

Cylinder Head/Remove and Install Cylinder Head CTM5 (20OCT92) 20-15-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=59 REMOVE AND INSTALL CYLINDER HEAD 1. Remove blower housing. (See Group 10.) 2. Remove cylinder head cover. -UN-19MAR91 3. Remove spark plug. 4. Remove cylinder head and gasket. 5. Make repairs as necessary. (See procedures in this M80244 group.) FA130D-AS16/AS19 IMPORTANT: Gasket surfaces are coated with sealant. Do not damage surfaces or gasket during installation. 6. Install cylinder head with new gasket. 7. Install cylinder head cover and cap screws. Tighten finger tight. 8. Tighten cap screws in sequence shown. Tighten to initial torque specifications. 9.

Continue in sequence, 4 N·m (35 lb-in.) at a time, until final torque is as specified. 10. Install spark plug and tighten to specification. 11. Install blower housing. TORQUE SPECIFICATIONS -UN-06DEC89 Cylinder Head Cap Screws Initial Torque . . . . . . . . . . . . . . . . . . . . . . . . . 10 N·m (89 lb-in.) Final Torque . . . . . . . . . . . . . . . . . . . . . . . . . 21 N·m (186 lb-in.) Spark Plug FA130D . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 N·m (156 lb-in.) TY15016 FA210D . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 N·m (212 lb-in.) FA130D-AN00 -UN-31AUG88 M51537 FA210D MX,2015A1,A1 -19-21OCT92 20 15 2