John Deere K Series Air-Cooled Engines — INSPECT CYLINDER HEAD

Cylinder Head/Inspect Cylinder Head INSPECT CYLINDER HEAD 1. Remove carbon deposits from combustion chamber and gasket surface using SCOTCH-BRITE abrasive pads or an equivalent. 2. Clean head with solvent. M80245 -UN-11MAR91 M80292 -UN-11MAR91 3. Inspect for cracks or broken cooling fins. 20 15 3 4. Inspect gasket surface for burrs and nicks. 5. Inspect head gasket for burns and traces of gas FA130D leakage. Replace if necessary. 6. Put cylinder head (A) on a surface plate. Check for distortion at several points around the head using a feeler gauge (B). Replace head if distortion is more than specifications. CYLINDER HEAD DISTORTION SPECIFICATIONS (MAX) FA130D . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . 0.25 mm (0.010 in.) FA210D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.40 mm (0.015 in.) FA210D MX,2015A1,A2 -19-21OCT92 CTM5 (20OCT92) 20-15-3 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=60