Cylinder Block, Valves and Internal Components/Camshaft REMOVE AND INSTALL CAMSHAFT 1. Remove crankcase cover. (See this group.) IMPORTANT: Align timing marks to prevent damage to tappets when removing camshaft. M80250 -UN-11MAR91 2. Rotate crankshaft until timing marks (A) align. 3. Remove camshaft (B). 4. Inspect camshaft. (See this group.) 5. Apply clean engine oil to camshaft lobes and journals. 6. Align timing marks and install camshaft. 7. Install crankcase cover. CTM5 (20OCT92) 20-20-6 K Series Air Cooled Engine MX,2020A1,A9 -19-21OCT92 AllTractorManuals.com 220596 PN=67 REMOVE AND INSTALL CRANKCASE COVER NOTE: Approximate crankcase oil capacity is:
FA130D ......................0.5L (1.06 pt) -UN-19MAR91 FA210D ......................0.6L (1.27 pt) 1. Drain crankcase. 2. Remove crankcase cover and gasket. M80249 3. Clean crankcase and crankcase cover gasket FA130D surfaces. NOTE: Do not force cover. Gears must mesh for proper positioning. 4. Install gasket and cover. Tighten cap screws using the -UN-19MAR91 sequence shown. TORQUE SPECIFICATIONS Mounting Cap Screws FA130D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 N·m (53 lb-in.) M80293 FA210D . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 N·m (186 lb-in.) Oil Drain Plug . . . . . . . . . . . . . . . . . . . . . . . . . .
14 N·m (121 lb-in.) FA210D MX,2020A1,A8 -19-21OCT92 20 20 6