Cylinder Block, Valves and Internal Components/Governor Adjustment GOVERNOR ADJUSTMENT—FA130D-AN00 AND FA210D-AS19-01/AS17/BS17/CS17 1. Move throttle control lever (A) to fast position. 2. Loosen nut (C). M80366 -UN-17MAY91 3. Hold governor arm fully clockwise. 20 20 23 4. Using a small pin, rotate shaft (B) clockwise as far as it will go. 5. Tighten nut. MX,2020A1,A39 -19-21OCT92 CTM5 (20OCT92) 20-20-23 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=84